3D Hex - Grey/Green/Black composite I recommend filling once the

I recommend filling once the scales are cut and roughly contoured

Shore D Hardness: 70

: Classic fit

NOTE: There is a knot present in this block

Toxic Green G10

3D Hex - Grey/Green/Black composite I recommend filling once theSanded to 150 grit, sprayed with clear coat to bring out the color. Tips for Working with Resin: Use sharp, preferably new drill bits or end mills Set drill press or mill to high RPM (2500 3000 rpm) Use slow, gentle feeds to prevent grabbing and twisting the material Be sure to release pressure on the drillbit occasionally to help clear the chips from the tip of the drillbit. Dimensions: 6"x4 1 4"x5 16" Note: These are UV reactive, they do not glow.