1/4" Hot Dipped Galvanized Hex Head Lag Bolt - 1000 Ct. Size:5" Information regarding the use of

Information regarding the use of two anchors on single- and multiple-ply trusses is included

The length is measured from under the head to the end of the bolt

Simple to install and can be installed on the inside or outside of the wall

locating the anchor in the right spot is easier than with cast-in-place bolts

Thread length on lag bolts can vary

1/4" Hot Dipped Galvanized Hex Head Lag Bolt - 1000 Ct. Size:5" Information regarding the use ofLag Screws are hex head bolts with coarse thread and sharp points most commonly used in wood applications. Length is measured from under the head to the tip. Thread length on lag bolts can vary. Some shorter lengths will be fully threaded.